Installing The Belt Clip; Installing The Optional Speaker/ Microphone (Or Headset) - Kenwood TK-3230DX Manual De Instrucciones

◆ The ambient temperature should be between 41°F and 104°F (5°C
and 40°C) while charging is in progress. Charging outside this range
may not fully charge the battery.
◆ The battery pack life is over when its operating time decreases even
though it is fully and correctly charged. Replace the battery pack.

INSTALLING THE BELT CLIP

INSTALLING THE OPTIONAL SPEAKER/ MICROPHONE (OR
HEADSET)
14
If necessary, attach the belt clip
using the two supplied M3 x 8 mm
screws.
1 Open the SP/MIC tabs on the side of
the transceiver.
2 Insert the accessory's plugs into the
SP/MIC jacks.
3 When you remove the accessory
from the transceiver, be sure to
cover the SP/MIC jacks with the
attached tabs, in order to keep dust
and dirt away from the contacts.