Ptt Id Side Tone; Mute Hold Time - Kenwood TK-3230DX Manual De Instrucciones

PTT ID Side Tone

When the PTT switch is pressed and/or released, a tone
will sound through your own speaker when the PTT ID is
transmitted.
To turn the PTT ID Side Tone on or off:
1 Enter the Setting Mode {page 24}.
2 Press the
3 Press the MENU key then press
select "
" (PTT ID Side Tone is off).

Mute Hold Time

Mute Hold Time keeps the speaker muted for a brief moment,
after a signal has been received. This prevents interference
with the PTT ID signal.
To set the hold time:
1 Enter the Setting Mode {page 24}.
2 Press the
3 Press the MENU key then press
select "
ms), "
" " (2000 ms), or "
or key to select "
" (PTT ID Side Tone is on) or "
or key to select "
" (hold time is off), "
" (1000 ms), "
".
or
".
or
" (500
" (1500 ms),
" (2500 ms).
to
to
39