Roger Beep Tone; External Speaker/Microphone Jack - Insignia IN-FRKF003 Guia Del Usuario

IN-FRKF003.book Page 11 Wednesday, January 26, 2005 2:28 PM
IN-FRKF003 GMRS/FRS Radio
Power Selection
Your IN-FRKF003 has two transmit power levels. To select the power level on
channels 1~7 and 15~22:
• Press until Pr appears on the display.
• Press or
The Hi/Lo icon alternately appears during setting.
• Press the PTT button to save and exit.
The HI or LO icon appears on the display depending on your setting.
Note: On channel 8~14 no power level selection is possible.
VOX
VOX (voice operated transmit) operation allows you to transmit without using
the PTT button when using a headset. To enable VOX operation:
• Insert the headset plug(s) into the SPK/MIC jacks.
• Set the radio into VOX mode.
To set the radio to VOX Mode, repeatedly press
flashes on the LCD display. Press
off, an on or oF appears on the display during setting. The VOX icon appears
on the LCD display if the radio is set into VOX mode.

Roger Beep Tone

Whenever you release the PTT button, a "Roger Beep" tone may be
transmitted to let your friends know you are finished talking. To enable the
Roger Beep, press repeatedly until the rb appears on the display. Press
and to set the Roger Beep tone on or off. An on or oF
appears on the display during setting.

External Speaker/Microphone Jack

Your IN-FRKF003 can be used with an optional external speaker/microphone
or headset, freeing your hands for other tasks. To use an optional speaker/
microphone or headset:
1 Insert the plug(s) into the SPK/MIC jacks.
www.Insignia-Products.com
to select between high and low power levels.
until the VOX icon
or to turn the VOX on or
11