Installing A Cartridge - Olivetti OLISCAN A600 Guia Del Usuario

Installing a Cartridge

NOTE:
Use original print cartridges only
WARNING: Do not touch the upper contacts of the cartridge support
or the inkjet cartridge nozzles.
1. Open the package containing the new
printer cartridge and extract the cartridge,
holding it from the top.
2. Remove the head protection tape
on the front side of the cartridge.
3. Switch off the machine using the rear switch.
Remove the document input tray.
4. Insert the cartridge through the rear
opening on the cartridge bay.
5. Place the front of the cartridge (where
the printing nozzles are located) on the
base of the cartridge bay.
6. Press the cartridge downwards, until you
hear a click. This means that the new
cartridge is inserted correctly.
CAUTION: When inserting the cartridge,
be
damage the ADF module.
7. Raise the cartridge support, rotating it in
an anticlockwise direction to bring it to the
correct operating position. Make sure that
the spring mechanism brings the head to
the horizontal position
8. To put the scanner back into operation,
mount again the document input tray.
OLISCAN A600 - USER'S GUIDE
very careful not to
21