Troubleshooting; Specifications - Dynex DX-RB100911 Guia Del Usuario

Dynex-A7.fm Page 6 Wednesday, June 29, 2005 5:21 PM

Troubleshooting

Problem
The LED indicator
doesn't turn on when
the charger is plugged
in.
The LED indicator is
blinking.

Specifications

Category
Electrical
specifications
Average charging
current
Average trickle
current
6
Solution
• Make sure that the batteries are
inserted with the correct polarity.
• If the batteries are inserted
correctly, unplug the charger,
remove the batteries, then clean
the batteries and charger contacts.
Next, reinstall the batteries, then
plug in the charger. If the problem
persists, the charger or the
batteries may be faulty.
• The charger may have overheated.
Unplug the charger, then let it cool
for 30 minutes.
• The battery or batteries may be
defective. Remove the batteries,
then insert different batteries.
Specification
• Input: AC 100V~240V, 50-60 Hz
• AA/7.5 A ±10%, AAA/3.0A ±10%
• 400 mA ±100