Safety Instructions - Ibx HM01 Manual De Usuario

Ocultar thumbs Ver también para HM01:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Safety Instructions

When working, wear the necessary personal protective equipment to avoid the risk of:
- Burns caused by splashing and evaporation of liquids
- Intoxication caused by release of toxic or flammable gases.
Set up the instrument on a spacious, stable, clean, non-slip, dry, and fireproof surface. Oo not
operate the instrument in explosive atmospheres, with hazardous substances or under water.
Connect the device to an earthed power supply to
ensure safety of the machine and the experiment;
connect the power as the machine requires it.
The use of this instrument in inflammable, explosive,
poisonous, or highly corrosive experiments is
forbidden.
Place the heating mantle on a horizontal, flat, stable
table.
The heating mantle must only be used by previously
qualified staff that has read the instructions manual
and knows how to operate it.
Do not place the heating mantle near any heat source.
During its functioning, dangerous materials such as
flammable or pathological substances must be out of
the device's safety area.
An overfilling of the vessel could cause some working
parts to overheat, which could dissolve flammable
materials and start a fire.
While the machine is working you must not touch the
hot surface, nor the vessel or the solution to protect
from high-temperature burns
Read the instructions manual before using this device
Table 1
3

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hm02

Tabla de contenido