Proper Use - Ibx HM01 Manual De Usuario

In models with stirring function , gradually increase or reduce the speed if:
•
- The stirring bar comes off because of a too high speed
- The instrument is not running smoothly
Temperature must always be set at least 25ºC below the flash point of the media used.
•
Beware of hazards due to:
•
- Flammable materials or media with a low boiling temperature
- Overfilling of vessels
- Unsafe vessel
Process pathogenic materials only in closed vessels.
•
Check the instrument and accessories before handling for damage prior to every use. Do not
•
use damaged components. Safe operation is only guaranteed with the accessories described in
the "Accessories" chapter. Accessories must be securely attached to the device and cannot come
off by themselves. Always disconnect the plug before the assembly or disassembly of
accessories.
The instrument can only be disconnected from the main power supply by pulling from the plug,
•
not the cable.
The voltage stated on the label must correspond to the main power supply.
•
Ensure that the mains cable does not touch the heating base. Do not cover the device.
•
Keep away from high magnetic fields.
•

2. Proper Use

The instrument is designed for heating and/or stirring mixtures of liquids in schools, laboratories
or factories. It is not suitable for domestic use or for use in environments that can be hazardous for
either the user or the instrument.
4