Parts & Supplies - Bissell ERASER 22814 Serie Guia De Inicio Rapido

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Replace Brush and Belt
1
Unplug and turn vacuum
over. Unscrew 10 Phillips-
head screws to remove
bottom cover.
4
1. Place Belt back on Brush Roll.
2. Pinch Belt around Brush Roll & hook
back around the motor gear.
NOTE: If an object becomes lodged in foot and brush shuts off, turn vacuum
off and unplug from electrical outlet. Remove obstruction and brush will automatically
reset when vacuum is plugged and turned back on.
Parts & Supplies
For Parts and Supplies, go to www.BISSELL.com and enter
your model number in the search field.
2
Pull Brush Roll straight
out and slide Belt off
motor gear. Replace
Brush Roll and/or Belt.
3. Rotate Brush Roll into place and line up
end caps.
4. Re-attach bottom cover with 10 screws.
3
Inspect Brush Roll by
placing it on its end
and spin. The Brush
Roll should spin freely,
multiple times by one
flick. If it doesn't, replace
Brush Roll. Inspect Belt,
replace if it appears
damaged.
www.BISSELL.com
13

Publicidad

Tabla de contenido
loading

Tabla de contenido