Backlight Mode - Honeywell HVC0001 Guia Del Usuario

Ocultar thumbs Ver también para HVC0001:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Owner's Guide 400-305-000-EFS
Set the Backlight mode
The controller provides 3 backlight modes. Depending on the mode selected, the screen behaves as
follows:
Scrn Off: The screen is not lit (the backlight is off).
Scrn On HI: The screen is lit at high intensity.
Scrn On LO: The screen is lit at low intensity (default mode).
When you press any button, the screen is lit at high intensity for 8 seconds.
To set the backlight
mode,
press
the
main button for 3
seconds to display
the setup menu and
proceed as shown:
(2 times)
8
Press the main but-
ton for 3 seconds at
(2 times)
any time (or do not
press any button for
60 seconds) to save
any changes you
have made and exit
Set Backlight
the setup menu.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hvc0002

Tabla de contenido