Package Includes; System Requirements - Tripp-Lite U336-1G-SFP Guía De Instalación Rápida

Package Includes

• U336-1G-LC, U436-1G-LC or U436-SMF-1G-LC USB to Fiber Optic
Ethernet Adapter
• Driver CD
• Quick Start Guide

System Requirements

• USB-A port (U336-1G-SFP) or USB-C port (U436-1G-SFP and
U436-SMF-1G-LC)
Installation
Note: Before installation, verify your fiber equipment's wavelength
1. Install the applicable driver on your computer or laptop before
connecting the USB fiber transceiver adapter. The driver can be installed
using the included CD or by visiting the model's Technical Support page
on tripplite.com to download.
2. Once the appropriate driver is successfully installed, connect a user-
supplied LC transceiver that is connected to a fiber network to the open
SFP port on the adapter. If using the U436-SMF-1G-LC, the transceiver
is already built into the unit and a separate transceiver is not needed.
3. If using the U336-1G-SFP , insert the USB-A male connector to a USB-A
port on your computer.
OR
If using the U436-1G-SFP or U436-SMF-1G-LC, insert the USB-C male
connector to the USB-C port on your computer.
4. A blue LED will illuminate to indicate a successful Ethernet connection.
The LED will blink when data is being transferred.
-08-188.indb 3 -08-188.indb 3
(1310 nm), mode type (single or multi) and distance (in meters)
matches that of the USB Fiber Transceiver Adapter specifications.
3
10/14/2020 6:03:01 P 10/14/2020 6:03:01 P