THERMEx Top Link Modul I Instrucciones página 71

M 536991200913062017
ADJUSTING TOP LINK
Top Link can be used together with all types of hobs and ovens, and it can thus be necessary to adjust Top Link to the specific hob or oven with which
it is to be used.
ADJUSTMENT OF DIP SWITCH
There are different programmes for Top Link, depending on whether it is a hob or an oven. The dipswitch is set to the selected product.
NOTE: The power must always be disconnected from the transmitter before the dipswitch is set.
It is set on dipswitch 1 whether it is a hob or an oven that is used.
Hob
The hood starts as standard at level 2 when the hob is turned on. If it is prefered to start the hood at level 3 instead, this can be set on dipswitch 2.
NOTE: This ONLY applies for connection to hob.
The hood turns on at level 2
If dipswitch 3 is set to ON, there will be a delay before the hood is turned on.
If Top Link is connected to a hob, the delay will be around 10 seconds. If it is an oven, the delay will be around 30 seconds.
Delay is activated
Oven
The hood turns on at level 3.
Without delay
THERMEX TOP LINK MODUL
71