Dedicated Micros Eco 4 Adiciones A La Guía De Instalación página 3

1 2 3 4
EVENT
LIVE
The operation of the internal CDR is identical to using the external CDR as described on the Eco4 Setup
Guide.
Note: Although the CDR drive may have a DVD-ROM label on the drawer it is not possible to read or write to
DVD media.
To insert a CDR:
1. Press the button on the CDR drawer
2. Pull the CD drawer out until there is resistance
3. Place the CDR with the writing side up on the spindle and press down until there is a click.
4. Push the drawer back in until it latches.
To remove a CDR:
1. Press the button on the CDR drawer
2. Pull the CD drawer out until there is resistance
3. Hold the CDR between thumb and forefinger and lift to remove from the spindle.
4. Push the drawer back in until it latches.
Note: In the event of a CD becoming jammed in the drive, or a power failure, it is possible to open the CDR
drawer by inserting a thin object such as a paper clip, or watchmaker's screwdriver into the small hole in the
CDR drawer and applying pressure until the drawer unlocks.
WARNING: The CDR is a Class 1 laser product to EN 60825-1:1994, avoid exposure to the beam.
Selecting CD-Rs and CD-RWs
The internal CD writer in the Eco4 CDR is not compatible with Ultra Speed CDR's. Ensure that only High
Speed or Multi-Speed CDR media is used. This is normally written on the CDR packaging and on the disk
itself.
Network settings (Page 14)
The Network settings screen has additional configuration option for entering the information on the Modem
initialise string.
Modem initialise
This text string will be transmitted from the Eco4 to the modem on a regular interval to ensure communication
is still present. It is also the string that would be used for 'dial in' for the PPP function.
Copy Images (Operator card)
There are number of destinations where images can be copied to; external CDR (connected to the SCSI port)
or the internal CDR. The external CDR now shipped by Dedicated Micros is the Plextor CD Writer.
Recording to the internal CDR
Recording to the internal CDR follows exactly the same operation as you would if you were recording to
external CDR devices. The recording to CDR section on the 'Operating Eco4' card also applies to the internal
drive.
The 'Copy Destination' is the only difference that is apparent in the menus, to copy to the internal CDR, select
'CDO: IDE 0 TOSHIBA DVD-ROM'.
COPY
GOTO
PLAY REC
SPOT
MODE MENU