Solpal L Instrucciones De Instalación Y Montaje página 38

Appendix
The following labels must be attached to the relevant valves in the systems in order for it to be
considered OG-300 complaint. The page should be laminated, each label cut from it, punched in the
margin at the left hand side and affixed to the appropriate valve with a wire tie, plastic ties are
inappropriate due to high operating temperatures and UV-radiation. Failure to affix these labels will
void the SRCC OG-300 system certification.
All fill and drain ports must be labeled with the following:
No other fluid shall be used that would change the original classification of this system.
Unauthorized alterations to this system could result in a hazardous health condition.
No other fluid shall be used that would change the original classification of this system.
Unauthorized alterations to this system could result in a hazardous health condition.
No other fluid shall be used that would change the original classification of this system.
Unauthorized alterations to this system could result in a hazardous health condition.
No other fluid shall be used that would change the original classification of this system.
Unauthorized alterations to this system could result in a hazardous health condition.
38
EN EN