Home Decorators SP5787 Manual Del Usuario página 18

Operation (continued)
5
Adjusting the Flame Brightness
□ The flame brightness mode should be used to set the flame
brightness.
□ Use Up or Down buttons to scroll through the flame
brightness settings: F0 (Flame OFF), F1, F2, F3, F4, F5
(brightest).
7
Adjusting the Ember Bed Color
□ The ember bed color mode should be used to set the ember
bed color.
□ Use Up or Down button to scroll through the ember bed color
settings: C1, C2, C3, C4, C5, C6, C7, C8
Setting
C1
C2
C3
C4
C5
C6
C7
C8
Color
Green
Blue
Red
Blue + Green
Red + Green
Red + Blue
Red + Blue + Green
Auto Change
(Logset brightness
Fade In / Fade Out)
6
Adjusting the Ember Bed Brightness
□ The ember bed brightness mode should be used to set the
ember bed brightness.
□ Use Up or Down buttons to scroll through the ember bed
brightness settings: L0 (lowest), L1, L2, L3, L4, L5 (brightest).
8
Using the Child Lock feature
□ When the unit is ON, hold the Power button for 10 seconds
to activate the Child Lock function. E3 will be displayed
and flash 3 times. When E3 is ON, heater is locked, E3 will
display when adjust temperature setting.
□ To deactivate the Child Lock function, hold the Power button
for 10 seconds.
NOTE: Child lock function is only available if using the
control panel.
18