Filling The Clean Water Tank - Oreck Revitalize FK50100 Serie Manual Del Usuario

FILLING THE CLEAN WATER TANK

NOTE: Using more than the recommended amount of cleaning solution may cause excessive foaming.
Press the Clean Water Tank latch on handle.
Angle the Clean Water Tank out to remove.
! !
WA R NI N G!
USE ONLY ORECK CLEANING PRODUCTS INTENDED FOR USE WITH THIS MACHINE. (SEE THE "CLEANING PRODUCTS" SECTION IN THIS
MANUAL FOR DETAILS.) THEY ARE SPECIALLY FORMULATED FOR USE WITH YOUR CLEANER. NON-ORECK CLEANING SOLUTIONS MAY
HARM THE MACHINE AND VOID THE WARRANTY.
3. OPERAT IO N
Turn water cap counter-clockwise to remove. Fill Clean Water Tank with hot tap water.
! !
C AU T I ON !
DO NOT FILL WITH WATER ABOVE 140˚F (60˚C).