Oreck Revitalize FK50100 Serie Manual Del Usuario página 23

Overlap strokes by 1/2 in. to prevent streaking.
Make additional strokes without pressing the
trigger. For heavily soiled areas, repeat the
cleaning process.
If additional cleaning is necessary, wait until
the upholstery is completely dry before using
the tool again.
Empty Dirty Water Tank when the motor
sound becomes higher pitched and there is a
loss in suction (see "Automatic Shut-Off").
When finished cleaning, follow "After
Cleaning" and "After Using Tool" instructions
on page 14.
For best cleaning results, Oreck
®
recommends to rinse the upholstery with
water only. This removes residual cleaning
solution.
23