Setting the temperature
controls
This refrigerator is designed to operate at
a household temperature of 55° to 100° F
(13° to 43° C).
INITIAL TEMPERATURE
SETTINGS
Locate refrigerator and freezer controls
on upper-left wall of refrigerator section
and set both controls to 3
1
.
⁄
2
IMPORTANT: Neither section will cool if
freezer control is set to OFF.
Adjusting the
temperature controls
MATERIALS NEEDED:
• 2 thermometers measure -5° to 50° F
(-21° to 10° C)
• 2 drinking glasses
IMPORTANT: Due to design of unit,
always start temperature adjustments
with freezer section.
FREEZER
➢ Place thermometer in glass of veg-
etable oil in middle of freezer.
➢ Allow 24 hours for temperatures to
stabilize.
➢ Check to see if temperature is 0° to 2° F
(-17° to -16° C).
• Turn control to next highest number
if too warm.
• Turn control to next lowest number if
too cold.
• Allow 5 to 8 hours for adjustments to
take effect.
➢ Repeat as necessary.
REFRIGERATOR
➢ Place thermometer in glass of water in
middle of refrigerator.
➢ Allow 24 hours for temperatures to
stabilize.
➢ Check to see if temperature is 38° to
40° F (3° to 4° C).
• Turn control to next highest number
if too warm.
• Turn control to next lowest number if
too cold.
• Allow 5 to 8 hours for adjustments to
take effect.
➢ Repeat as necessary.
6