Use The Barcode Scanner (Dpm8500 Only); Add Barcode Information To A File; Display Barcode Information; Overwrite Barcode Information - Philips POCKET MEMO DPM8000 Manual De Instrucciones

Use the barcode scanner (DPM8500
only)
The barcode module allows barcode scanning from a distance of
up to 25 cm (10 inches) and supports barcode information with
up to 30 digits.

Add barcode information to a file

1
While the recorder is in stop mode, press F1 (Scan) and
scan the barcode.
X When a barcode is recognized, the device will beep and
the barcode information is displayed.
2
Press F2 (OK) to confirm the barcode input.
X The device returns to the stop mode.

Display barcode information

To display previously recorded barcode information:
1
While the recorder is in stop mode, press F2 (Menu) and
select File > File information.

Overwrite barcode information

1
While the recorder is in stop mode, press F1 (Scan) and
scan the barcode.
X When a barcode is recognized, the device will beep and
the old and the new barcode information is displayed.
2
Press F2 (OK) to confirm the new barcode information and
to overwrite the old barcode information.
X The device returns to the stop mode.
23
EN