Technical Specifications - HQ-Power VDP150CC2 Manual De Instrucciones

The LED next to the LED display indicates the status of the DMX signal.
LED flashing: DMX signal present.
LED off: no input DMX signal.
After powering on the device the display shows the DMX start address. Set the desired start address by means of the
YES/NO buttons to increase or decrease the address. Press the ENTER button to confirm. The display will show
"PASS" to confirm your settings. Other functions can also be selected by means of F-DOWN and F-UP buttons,
changed by means of the NO, YES buttons and confirmed by means of the ENTER button. The device has these
functions:
6. Cleaning and Maintenance
1. All screws should be tightened and free of corrosion.
2. The housing, the lenses, the mounting supports and the installation location should not be deformed, modified or
tampered with e.g. do not drill extra holes in mounting supports, do not change the location of the connections, ...
3. Mechanically moving parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. There are no user-serviceable parts, apart from the lamp and the fuse (see "4. Installation" on p.2).
8. Contact your dealer for spare parts if necessary.

7. Technical Specifications

Power Supply
Power Consumption
Fuse
Dimensions
Total Weight
Lamp
Max. Ambient Temperature
The information in this manual is subject to change without prior notice.
VDP150CC2
Function Code Corresponding Function
F1 No function
F2 No function
F3 Reset
F4 Music Control
F5 Auto Program
F6 Master – Slave Function
F7 No Function
F8 Display up/down
max. 230VAC/50Hz
max. 150W
F 3A, 250VAC (5 x 20mm) (order code FF3N)
330 x 270 x 160mm
3.2kg
15V / 150W EFR GZ6.35 (order code LAMP150/15)
45°C
4 VELLEMAN