Equipment Installation; Optional Patch Panel Installation; Specifications - Tripp-Lite SmartRack SRWF5U El Manual Del Propietario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7. Equipment Installation

Warning: Do not install equipment until you have stabilized the enclosure. If using sliding equipment rails, be careful when extending the
rails. Do not extend more than one set of sliding equipment rails at one time. Avoid extending sliding equipment rails near the top of the
1
enclosure.
Note: The threaded holes in the middle of each rack unit are numbered. A single rack unit includes the space occupied by the numbered hole and the holes
directly above and below.
2
3
3
4
WARNING: Follow the instructions in your equipment documentation to ensure proper installation of your equipment.
5
1
Locate the numbered openings in the mounting rails where you plan to install your equipment.
Lower your equipment into the enclosure and set it down on the mounting rails, lining up the
mounting holes on the equipment with the mounting rail's mounting holes.
Use the included mounting screws and washers to secure your equipment to the rack rail. Place
2
the washers between the screws and the equipment mounting brackets.
Note: Your equipment may also include mounting hardware. Read the mounting instructions that
came with your equipment before installing your equipment.

8. Optional Patch Panel Installation

The unit comes with an integral, slide-out mounting bracket at the top of the enclosure. It can be
used to secure a patch panel to the enclosure, and it partially slides out for easier cabling access.
To install a patch panel on the patch panel mounting bracket, use the included mounting screws
and washers to secure your equipment to the rack rail. Place the washers between the screws and
the patch panel mounting bracket.

9. Specifications

Model
Dimensions (H x W x D)
Unit Weight
Load Capacity*
Mounting Depth (Adjustable)
* Full wall-mount load capacity requires a mounting surface capable of bearing the full load.
1 Rack Unit
SRWF5U
28.8" x 25.6" x 9.7" (732 x 651 x 247 mm)
45 lb (20.4 kg)
150 lb (68.1 kg)
17" to 20" (432 to 508 mm)
7
1
2
3
3
4
5
1
2
1
3
4
5
2
SRWF5U36
43" x 25.6" x 9.7" (1092 x 650 x 246 mm)
55 lb (25 kg)
150 lb (68.1 kg)
33" to 36" (838 to 914 mm)

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Smartrack srwf5u36

Tabla de contenido