European Certifications; South American Certifications - SMAR LD291 Manual De Instrucciones, Operación Y Mantenimiento

LD291 - Informaciones sobre las Certificaciones
A.2
Class 2258 04 Intrinsically Safe, Entity for Class I, Division 1, Groups A, B, C and D; Class II,
Division 1, Groups E, F and G; Class III, Division 1. Intrinsically safe with entity parameters: Vmax =
28 V, Imax = 100 mA, Ci = 5 nF, Li = 0 uH, when connected through CSA Certified Safety Barriers.
Ambient Temperature: (-20ºC < T
Enclosure Type: 4 or Type 4X.

European Certifications

Certificate No: Nemko 03 ATEX 133X
ATEX Intrinsically Safe Group II 1GD, Ex ia IIC T4
Entity Parameters: Pi = 0.7 W Ui = 28 V Ii = 100 mA Ci = 2 nF Li = Neg
Ambient Temperature: (-20 ºC < T
Certificate No: Nemko 02 ATEX 149X
ATEX Explosion Proof Group II 2G, Exd IIC T6
Enclosure Type: IP66/68 or IP66/68W
Special conditions for safe use:
1. The transmitters are marked with three options for the indication of the protection code. The
certification is valid only when the protection code is indicated in one of the boxes following the
code.
The following options apply:
•
Ex d IIC T6 ( ) with X ticked in the parenthesis:
The Ex d IIC T6 protection according to certificate Nemko 02ATEX035X /
02ATEX149X applies for the specific transmitter. Certified Ex d IIC cables entries shall be
used.
•
Ex ia IIC T4 ( ) with X ticked in the parenthesis:
The Ex ia IIC T4 protection according to certificate Nemko 03ATEX133X applies for the
specific transmitter. Certified diode safety barriers shall be used.
•
Ex d IIC T6 / Ex ia IIC T4 ( ) with X ticked in the parenthesis:
The transmitter has double protection. Both Ex d IIC T6 and Ex ia IIC T4 protection
apply for the specific transmitter according to certificates Nemko 02ATEX035X/
02ATEX149X and Nemko 03ATEX133X. In this case the transmitter shall be fitted with
appropriate certified cable entries Ex d IIC and the electric circuit supplied by a certified
diode safety barrier as specified for the protection Ex ia IIC T4.
2. For enclosures of the transmitters made of aluminum impact and friction hazards shall be
considered when the transmitter is used in category II 1 G according to EN 50284 clause 4.3.1.
3. The diode safety barrier shall have a linear resistive output characteristic.
4. The pressure of the potentially explosive atmosphere surrounding the transmitter shall be
within the range 0.8 mbar to 1.1 mbar.
Certificate No: DMT 01 ATEX E 059
ATEX Intrinsically Safe
Group II 1/2 G, Ex ia, IIC T4/T5/T6
Ambient Temperature: -40 ºC < T
Entity Parameters: Ui = 28 Vdc Ii = 93 mA Ci ≤ 5 nF Li = neg

South American Certifications

Certificado No: CEPEL-Ex-049/95
Intrinsicamente Seguro - Ex-ia IIC T5
• Parâmetros: Ui = 30 Vdc Ii = 100 mA Ci =6,4nF Li = neg Pi=0,7 W
Temperatura Ambiente: (-20 ºC < T
Certificado No: CEPEL-Ex-039/96
Á Prova de Explosão - Ex-d IIC T6
Temperatura Ambiente: (-20 ºC < T
Grau de proteção: IP66 ou IP66W.
<+40ºC).
amb
<+62 ºC).
amb
<+85 ºC
amb
<+50 ºC).
amb
<+40 ºC).
amb