Dmx Linking - Chauvet Professional OVATION ED-190WW Guía De Referencia Rápida

Ovation™ ED-190WW QRG
AC Power
Power Linking
AC Plug
Replacing The Fuse

DMX Linking

DMX Connection
Master Control
Master/Slave
Connection
Dimmer Control
This product has a switchable power supply that can work with an input voltage of
120 VAC, 60 Hz or 230 VAC, 50 Hz.
To eliminate unnecessary wear and improve its lifespan, during periods
of non-use completely disconnect the product from power via breaker or
by unplugging it.
You can link up to 4 Ovation™ ED-190WW products at 120 V or 8 products
at 230 V. Never exceed this number. Power linking cords can be purchased
separately.
Connection
AC Live
AC Neutral
AC Ground
To eliminate unnecessary wear and improve its lifespan, during periods of
non-use completely disconnect the product from power via breaker or by
unplugging it.
1. Disconnect this product from power.
2. Using a Phillips #2 head screwdriver, unscrew the fuse holder cap from
the housing.
3. Remove blown fuse and replace with a good fuse of the same type and
rating.
4. Screw the fuse holder cap back in place and reconnect power.
The Ovation™ ED-190WW will work with a DMX controller using a 3- or 5-pin
DMX serial connection.
www.chauvetprofessional.com.
The Ovation™ ED-190WW uses a 3- or 5-pin DMX data connection for its DMX
personalities: UNO, DOS, and STD.P. See the User Manual for information about
connecting and configuring the product for DMX operation.
The Ovation™ ED-190WW allows control of other Ovation™ ED-190WW
products using a regular DMX data connection. See the User Manual to configure
for Master Control operation.
The Ovation™ ED-190WW uses the DMX data connection for its Master/Slave
mode. See the User Manual for information about connect and configure the
product for master/slave operation.
The Ovation™ ED-190WW may be plugged into and controlled using a regular
dimmer. In this mode, the product reacts exactly like an incandescent product. See
the User Manual to configure Dimmer Control operation.
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
A DMX
3
Screw Color
Brown Yellow/Brass
Blue Silver
Green
Primer is available
EN
from