Pairing Your Cell Phone And Bluetooth Remote Box; Answering An Incoming Call; Re-Dialling Last Called Number; Ending A Call - vdodayton CD 1737X Instrucciones De Manejo

Pairing your cell phone and
®
Bluetooth remote box
1. Press the VOL+ on the Bluetooth
The LED on the remote box will start flashing
fast, the pairing mode is activated.
Refer to cell phone's user manual to learn
who to put your cell phone into pairing
mode.
The default PIN is 0000
2. After pairing, the LED on the car unit will flash
every 3 or 4 seconds to indicate that the unit
is in call waiting mode for receiving and mak-
ing calls.

Answering an incoming call

1. The ring tone will sound from the car radio
speaker.
2. Short press the TALK button to answer the
call.
3. Now you can talk hands free via the micro-
phone of the Bluetooth
from the car audio speaker instead of your
cellular phone.
During talking, the LED on the Bluetooth
unit light continuously.
4. You can adjust the volume by means of the
VOL+ and VOL- button on the car radio.
5. To receive a call directly on your cell phone,
press the TALK button longer then 3 sec-
onds.

Re-dialling last called number

1. In call waiting mode, press the TALK button
twice, the last called number will be re-di-
alled.

Ending a call

1. Press the TALK button once and the Blue-
tooth ® car unit will return to the call waiting
mode.
State of the LED on the Bluetooth
car unit
State LED Status
Pairing flashes fast
Not connected Off
Connected Lights every 4 sec. for
2 sec.
Ringing Lights continuously
Talking Lights continuously
20
Note:
The Bluetooth
solution integrated into the Bluetooth
®
remote box.
and the cell phone to be paired with. The
firmware of the cell phone may vary from re-
gion to region and manufacturer to manufac-
turer.
®
car unit and listen
® car
®
® compatibility depends on the
® car unit