Using The V-Chip - Samsung LN-S4096D Manual De Proprietário

Using the V-Chip

Access to channels and programs is controlled by a password (i.e., a 4-digit secret code that is defined by the user).
The on-screen menu will instruct you to assign a password (you can change it later, if necessary).
How to Change Your Password
U.S.A Only
This product is covered by the following U.S. patents : US4,930,158, US4,930,160
1
Press the MENU button. Press the
then press the ENTER button.
Press the or
ENTER button.
2
Press the button. Press the number buttons to enter your current
4-digit PIN. (The default PIN for a new TV set is "0000".)
The "V-Chip" menu is displayed.
3
Press the or
then press the ENTER button.
4
Press the button. Press the number buttons to enter your new
4-digit PIN. Re-enter your new PIN to confirm.
The message will automatically disappear, and return to the previous
menu after a few seconds, even if the
Select "Return" by pressing the
ENTER button to return to the previous menu.
Press the EXIT button to exit.
The PIP doesn't function when the V-Chip is active.
If you forget the pin number, press the remote control buttons in the following sequence,
which resets the pin to 0-0-0-0: POWER (Off), MUTE, 8, 2, 4, POWER (On).
The V-Chip function only works in TV, AV mode and S-Video mode.
English-64
or
button to select "V-Chip", then press the
button to select "Change PIN",
ENTER button is not pressed.
or button, then press the
button to select "Setup",