Adjusting the Picture Quality
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone,
then do the frequency adjustments to the utmost and fine tune again. After the noise has been reduced, re-adjust the picture so
that it is aligned on the center of the screen.
1
Press the
SOURCE button to select "PC".
2
Press the
MENU button. Press the
then press the ENTER button.
3
Press the
or
button.
4
Press the
or
button.
5
Press the
or
ENTER button.
6
Press the
or
Select "Return" by pressing the
ENTER button to return to the previous menu.
Press the EXIT button to exit.
This feature may change the width of the image. If necessary, adjust the position to center.
English-112
or
button to select "PC", then press the
button to select "Image Lock", then press the
button to select "Coarse" or "Fine", then press the
button to remove the picture noise.
or
button, then press the
button to select "Setup",
ENTER
ENTER