Changing The Picture Size - Samsung LN-S4096D Manual De Proprietário

Changing the Picture Size

You can select the picture size which best corresponds to your viewing requirements.
You can select only the 16:9, 4:3 and Wide Fit screen sizes in the DTV Component (720p, 1080i) or HDMI (720p, 1080i) mode.
When Double ( , ) mode has been set in PIP, the Picture Size cannot be set.
When watching a DTV's HD signal, you can use Wide Fit. Horizontal
zoom (Wide Fit) sets the optical picture format by expanding it both
horizontally and vertically. For example, you can reset the picture in
4:3 format to 16:9. Wide Fit does not support all external devices.
To maintain scale in the Wide Fit mode, portions of the picture on the
top and bottom will be cropped.
1
Press the MENU button. Press the
then press the ENTER button.
Press the or
ENTER button.
2
Press the or
press the ENTER button.
Select "Return" by pressing the
ENTER button to return to the previous menu.
Press the EXIT button to exit.
• 16:9 : Sets the picture to 16:9 wide mode.
• Zoom1 : Magnifies the size of the picture on screen.
• Zoom2 : Magnifies the size of the picture more than "Zoom1".
• Wide Fit : Enlarges the aspect ratio of the picture to fit the entire screen.
• 4:3 : Sets the picture to 4:3 normal mode.
Alternate method
Press the P.SIZE button on the remote control
repeatedly to select one of the picture size settings.
English-43
or
button to select "Size", then press the
buttons to select the screen format you want, then
or button, then press the
4 : 3
button to select "Picture",
Wide Fit