Responsibilities Of The User - ABIKOR BINZEL ABITIG WH Instructivo De Servicio

®
ABITIG WH
1 Identification
1.1 CE marking

1.2 Responsibilities of the user

TIG welding torches are used in industry and in the trade for inert gas welding
using tungsten electrodes and inert gases. This range can be used in all
welding positions. TIG welding torches are available in liquid-cooled models.
The liquid-cooled model requires a coolant recirculator. These operating
instructions only describe TIG welding torch ABITIG
torches may only be operated using original ABICOR BINZEL spare parts.
This device fulfils the requirements of the relevant EU directives.
Conformity is confirmed by the CE marking on the device.
Within the EEA (European Economic Area) the current version of the national
implementation of the Framework Directive (89/391/EEC) and the related
individual directives and, of these, especially Directive (89/655/EEC)
concerning the minimum safety and health requirements for the use of work
equipment by workers at work must be adhered to. In Germany, the Labor
Protection Law and the Company Safety Ordinance must be heeded. In
addition, the operator must ensure that the TIG welding torches in connection
with welding units complies with the EC EMC Directive (2014/30/EU) and that
the protection is correctly installed.
1 Identification
®
WH. TIG welding
EN - 3