Control Panel; Online Mode; Offline Mode; Setup Mode - MPI Tally Dascom T2265+ Guia De Instalacion

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Control panel

Control panel
The control panel and the keys are used for controlling the printer operation.
The upper line of the display shows whether the printer is in Online or Offline mode and the
paper path selected (Tractor1 or Single).
After switching on, the printer is automatically set to online mode. Only in this mode can it receive

Online mode

data from the computer.
Online
Trac1
Online
Tear
1
2
3
4
Setup
Only in this mode is it possible to perform step, line, or form feeds from the control panel (see page 20,

Offline mode

Paper transport); however, data cannot be received.
Offline
Trac1
Online
Park
Load
Load
1
2
3
4
Setup
In this mode, the following settings are available:

Setup mode

Adjust
Paperway
Online
Menu
Char
1
2
3
4
Setup
Access to the other menu settings (Menu) may be disabled by the manufacturer. For informa-
tion on how to enable access and about the available settings, refer to the User Guide on the
Online CD-ROM. (chapter The Menu, section Enabling the menu).
Mantenimiento Periféricos Informaticos C/Canteras, 15 28860 Paracauellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/
8
Tear key (4): Activates the tear function when fanfold paper is loaded (see
page 21, Moving the paper to the tear position). If Load is displayed above
this
key, no paper is loaded in the printer; press the key to feed paper to the
printing
position.
Setup key: Sets the printer to setup mode.
Online key: Sets the printer to offline mode.
Park key (1): Clears the paper path with paper loaded and activates paper
path quick selection (see page 15, Changing the paper type).
Key
(2): Short keypress: Microstep forward.
Long keypress: Continuous paper feed.
Key
(3): Short keypress: Microstep reverse.
Long keypress: Continuous paper reverse feed back to the park position.
Load key (4): If no paper is loaded, see above.
If paper is loaded: Short keypress: Line Feed (LF);
long keypress: Form Feed (FF).
Setup key: Sets the printer to setup mode.
Online key: Sets the printer to online mode.
Setup key: Sets the printer to setup mode, in which the following
settings can be selected:
Menu key (1): Other menu settings.
Adjust key (2): Tear position, first printing line and print head gap.
Paperway key (3): Paper path.
Char key (4): Font and number of characters per inch.
Quick start guide

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Tally dascom t2280+

Tabla de contenido