Powering On/Off; Precautions When Using Qbic Under Water - Elmo QBiC X1 Manual De Instrucciones

3. Insert the WiFi card in the WiFi card slot.
* Pay attention to the direction of the card when inserting the WiFi card. Insert the WiFi card
until it clicks.
Improper insertion of the card may cause error or damage the product.
4. Close the back cover and lock it. Insert a flat object such as a coin in ① and turn it
to the direction ② indicated with an arrow.
* Make sure to close the cover correctly and lock it tight. Insufficient locking may deteriorate the
waterproof performance and damage the product.

POWERING ON/OFF

POWERING ON
Press and hold (over 1second) [Power Switch] to power on the product. [Power LED]
turns blue or green.
* The blue light indicates that the product is receiving GPS signal. The green light indicates
that the product is not receiving GPS signal.
POWERING OFF
Press and hold (over 2 seconds) [Power Switch] to power off the product. [Power
LED] turns off.

PRECAUTIONS WHEN USING QBiC UNDER WATER

Follow the following instructions when you use the camera under water.
WiFi card slot
②
①
9