Powering On/Off - Elmo QBiC MS-1 Guía De Puesta En Marcha

INSERTING micro SD CARD
1. Open the Interface Terminal Cover.
2. Insert the micro SD card to the micro SD card
slot.
* Pay attention to the direction of the card when inserting the
micro SD card. Insert the micro
SD card until it clicks. Improper insertion of the card may cause
error or damage the camera.
*Refer to the QBIC MS-1 INSTRUCTION MANUAL for the
compatible list of the micro SD card.
3. Close the Interface Terminal Cover.
* Make sure to close the cover correctly. Otherwise the
waterproof performance may be deteriorated, causing damage
to the camera.

POWERING ON/OFF

POWERING ON
Press and hold (over 1 second) the [Power Switch]
to power on the camera. The [Power LED] turns
blue.
All manuals and user guides at all-guides.com
8