Description; Operating Elements And Construction; Theory Of Operation - Oki BVX-200 Guia Del Usuario

2.0 Description

2.1 Operating Elements and Construction

ESD Safe
Filter Cover Latch (front
and back).
Pull from bottom to open.

2.2 Theory of Operation

The efficient removal of hazardous fumes at your workplace is a two-step
process: fume capture and filtration. The filter unit is supplied with a set of
filters already installed.
To capture the fumes, Metcal recommends use of optional exhaust arms and
accessories (purchased separately). The exhaust arms need to be set up
properly (instruction supplied with exhaust arm) and the nozzle positioned in a
way to optimize the fume capture.
Air extracted from your work area will be purified when passing through the
filters inside the unit and then is returned into your work area.
Contact your local Metcal representative if there are any questions regarding
the proper selection of filters for your application.
OK International ¥ Copyright © All Rights Reserved ¥ BVX-200 Rev 01-15-04
Air Inlets:
63mm OD
50mm ID
On/Off Switch with
Red ON Indication
7
Power
Supply