Appendix A: Application Note - Promax PROLITE-67 Manual De Instrucciones

USER'S MANUAL PROLITE-67

APPENDIX A: APPLICATION NOTE

Quick guide to certificate a telecommunication installation.
A.- Capturing reference measures.
1.- Connect a pigtail to the PROLITE-105 output connector.
2.- Connect another pigtail to the OLT input connector of the PROLITE-67 (See
figure A).
3.- Use the SC-SC adapter to connect both pigtails.
4.- Power on the PROLITE-105 and the PROLITE-67.
5.- Select the ATTENUATION TEST function in the PROLITE-67.
6.- Press once the SEQ
PROLITE-105.
7.- Capture the reference values of the wavelengths by pressing
simultaneously for 1 second both cursor keys in the PROLITE-67.
8.- Now you can measure at each access point its attenuation.
07-2012
key to select the SIMULTANEOUS mode in the
Figure A.-
Page 47