Menu Options; Dmx Linking; Wireless Remote Control - Chauvet DJ Geyser P4 Guía De Referencia Rápida

Geyser P4 QRG
Control Panel
Description

Menu Options

Main Level
Addr
nCoL
CH-1–CH-4
Ht

DMX Linking

Starting
Address
Wireless
Remote
Control
Button Function
<MENU> Exits from the current menu or function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases the
<DOWN>
numeric value when in a function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Programming Levels
d- -1– d503
P 0 (Blackout)
P 1–P32
P1-1–P1-32
T _ _ _
The Geyser P4 can work with a DMX controller when linked by DMX serial
connections. Instructions for connecting and configuring this product for
DMX operation are in the User Manual. If you are not familiar with DMX,
download the DMX Primer from www.chauvetlighting.com.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 503.
To trigger fog output and activate the color program using the wireless
remote control, do the following:
1. Plug the wireless receiver into the Remote Control Receiver port on
the side of the Geyser P4
2. Program the color choice for each button on the remote (1–4),
using the CH-1–CH-4 menu options on the Geyser P4.
3. On the wireless transmitter, press the button assigned to the color
program (1–4). The Geyser P4 emits fog and activates the color
program for as long as you hold down the button.
Description
Selects DMX starting address
Selects preset color for <MANUAL> button
Selects preset colors for wireless remote
operation
Shows current temperature of product
EN