Menu Options; Manual Operation; Dmx Values - Chauvet DJ HURRICANE HAZE 3D Guía De Referencia Rápida

Hurricane Haze 3D QRG
Control Panel
Description

Menu Options

Main Function
DMX Mode
Manual Mode
DMX Linking
Starting
Address
Remote or
Manual
Operation

DMX Values

2-CH
Channel Function
Button Function
<MENU> Exits from the current menu or function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases the
<DOWN>
numeric value when in a function
Programming Levels
d001–d512
Haze Volume
Blower Speed
The Hurricane Haze 3D can work with a DMX controller when linked by
DMX serial connections. Instructions for connecting and configuring this
product for DMX operation are in the User Manual. If you are not familiar
with DMX, download the DMX Primer from www.chauvetlighting.com.
To ensure full access to all channels in DMX mode, the highest
recommended DMX address is 511.
The Hurricane Haze 3D can be operated manually or with the included HC-
T wired timer remote controller. Details can be found in the User Manual,
available at www.chauvetlighting.com.
To use the HC-T with the Hurricane Haze 3D, do the following.
1. Set both the haze output volume and the blower fan speed to x000.
2. Plug in the HC-T into the wired remote controller socket.
The Hurricane Haze 3D operates according to following priority control
levels.
1. A DMX controller will take priority control over both the product's
control panel and the HC-T.
2. The control panel will only take priority control over the HC-T.
3. The HC-T has the lowest priority control level.
1 Blower Speed
2 Haze Volume
Sets DMX starting address
h000–h005 Selects the volume of haze output, low to high
f000–f005 Selects the blower fan speed, low to high
Value Percent/Setting
000 ó 255 Low to high
000 ó 255 Low to high
5
Description
EN