Alesis RECIRAL PRO Guia Del Usuario página 9

Effects
Reverb
You can also add an adjustable reverb effect to your sound.
To enable the reverb effect:
1. Press the Reverb button to turn on the reverb effect. The button LED will be lit.
2. Press the button again to turn off the reverb effect.
To change the reverb type:
1. Press the Function button to enter Function Mode, then turn the Value Dial to select
Reverb Type.
2. Press the Function button again to enter the corresponding edit menu. The parameter will
flash, indicating it is editable.
3. Turn the Value Dial to select the desired reverb type:
•
Hall 1
•
Hall 2
•
Room 1
•
Room 2
•
Room 3
•
Stage 1
•
Stage 2
•
Plate
4. After 7 seconds of inactivity, the Display will return to the main screen.
To change the reverb depth:
1. Press the Function button to enter Function Mode, then turn the Value Dial to select
Reverb Depth.
2. Press the Function button again to enter the corresponding edit menu. The parameter will
flash, indicating it is editable.
3. Turn the Value Dial to adjust the reverb depth from 000–127.
4. After 7 seconds of inactivity, the Display will return to the main screen.
Chorus
You can also add an adjustable chorus effect to your sound.
To enable the chorus effect:
1. Press the Chorus button to turn on the chorus effect. The button LED will be lit.
2. Press the button again to turn off the chorus effect.
9