Suunto POD Manual Del Usuario página 3

1. QUICK START GUIDE
To start using your Suunto GPS POD right away, follow these steps (see also figures below):
1. Insert batteries
• Open the GPS POD by turning the bottom cover counterclockwise.
• Insert batteries and close the POD by turning the bottom cover clockwise.
2. Pair the GPS POD with your Suunto wrist unit (t6 and t3/t4 messages, see Table 1).
• Select TRAINING > PAIR (A POD) > SPD POD/GPS in the wrist unit menu.
TURN ON NEW DEVICE' or 'TURN ON GPS
'
• Turn the GPS POD on by pressing the Power (Start/Stop) button for 1 second.
Soon after, '
3. Connect the devices.
• Select SPD/DST > CONNECT (or Training mode in t3/t4) in the wrist unit menu.
'FND SPD/GPS POD'
4. Let the POD find a GPS connection (outdoors).
• Take the POD outside, its top cover facing to the sky. Wait for the green light to
change from fast blinking to slower blinking (1/s); this may take up to 60 sec-
onds. Now the POD has found a satellite connection and your wrist unit displays
speed and distance information in the SPD/DST mode.
(size AAA; included in the sales package)
PAIRING COMPLETE
is shortly displayed when the device has been found.
' is displayed.
or 'PAIRED GPS'
'
.
is displayed.
1