Preparation For Use - Aiwa LED-251FHD Manual De Usuario

6
en

PREPARATION FOR USE

Carefully remove all the components from the carton and remove all packing materials from the components.
Make sure that nothing is accidentally discarded with the packing materials.
If possible, save the carton and packing materials for the unlikely event that the product ever needs
to be returned for service. Using the original carton and packing materials is the only proper way to
protect the unit from shipping damage.
FHD TV (x1)
Remote control (x1)
AAA type batteries (x2)
Quick start guide (x1)
Base stands (x2)
FEATURES OF THE TELEVISION
This unit has a built-in LED display window to provide clear vision and low radiation.
• Hotel Lock.
• Auto TV Scanning.
• Digital Broadcasting Reception.
• TV Guide Function.
• TELETEXT (Europe) Function.
• USB Multimedia Playback.
• Multi-languages On Screen Display.
• Full Function Remote Control.
• Support HDMI, SCART, YPbPr, AV, VGA, PC
AUDIO and CI Input.
Screws (x4)
Warranty card (x1)
12V power cord (x1)
• EARPHONE and COAXIAL Output.
• PVR Function.
• TIMESHIFT Function.
• Detachable Stand Holder.
• TV and Satellite TV Antenna Jack.
• Built-in Speakers.
• Prepared for 12V (cable included).
DISASSEMBLY AND INSTALLATION
Open the package.
1.
Take out the TV.
2.
STAND INSTALLATION
1. Place the TV faced down on a soft cloth or
cushion to prevent the panel from being
damaged.
2. Align the Stand with TV bottom and
then force the end of stand until the TV
is fully seated on the stand. Tighten the
included screws with a screw driver.
3. Install the display on a solid horizontal
surface such as a table or desk.
For ventilation, leave a space of at least
10cm free all around the set.
WARNING!
Never place a television set in an
unstable location. A television set may
fall, causing serious personal injury
or death. Many injuries, particularly
to children, can be avoided by taking
simple precautions such as:
- Using cabinets or stands recommended
by the manufacturer of the television.
Install the TV stands.
3.
Connect the power cord.
4.
- Only using furniture that can safely
support the television.
- Ensuring the television is not overhanging
the edge of the supporting furniture.
- Not placing the television on tall
furniture (for example, cupboards or
bookcases) without anchoring both
the furniture and the television set to
a suitable support.
- Not placing the television set on cloth
or other materiaIs that may be located
between the television set and supporting
furniture.
- Educating children about the dangers
of climbing on furniture to reach the
television or it's controls.
lf your existing television set is being retained
and relocated, the same considerations as
above should be applied.
(Only for the TV with mass exceeding 7kg).
7