Snom 821 Manual Del Usuario página 7

Setting up and connecting the phone
Initializing and registering the phone
Please note: You will need the registration information received from your
Internet service provider or your network administrator - normally the phone or
extension number, the password, and the registrar.
After you have set up the phone and connected it to the network as shown on pages
2 - 3, the phone begins to initialize.
Normally the initialization is completely automatic, using DHCP. If your network does not
support DHCP, you must obtain the IP address, netmask, IP gateway, and DNS server
from your Internet service provider or your network administrator and enter them manually
when you are asked to do so on the display.
Watch the display and, when asked to, make selections with  and save with
1. Language. The default is English.
2. Time zone
3. Dial tone
4. The display shows the "Welcome" screen. Press any key to log on.
5. Enter the account number. Save with
6. Enter the registrar. Press
7. Enter the password received from your Internet service provider or administrator.
Press . After successful registration you will see:
Infobar with date & time
Active identity:
Green symbol
Entering numerals, letters, and special characters
Press any key or pick up handset.
Current input mode:
Next input mode:
Changing input mode:
Move cursor to the left
:
Move cursor to the right
:
Entering letters, special characters and symbols
In input modes small and capital letters, press the alphanumeric key one or more times
quickly, with a pause after each character.
.
Identity line
Delete character to
the left of the cursor
snom 821 Quick Start Guide
: See pages 2 - 3
.
Inactive identity:
Gray symbol
.
Input modes:
123: Numerals
abc: Small letters
ABC: Capital letters
Redial
Directories, call lists,
contact list, favorites
E
N
G
L
I
S
H
7