Axis Ip Utility - Single Camera/Small Installation; Automatic Discovery; Assign The Ip Address Manually (Optional) - Axis Communications 231D+ Guia De Instalacion

Page 8

AXIS IP Utility - single camera/small installation

AXIS IP Utility automatically discovers and displays Axis devices on your network. The application can also be used
to manually set a static IP address.
Note that you must install the AXIS 231D+/232D+ on the same network segment (physical subnet) as the computer
running AXIS IP Utility.

Automatic discovery

1. Check that the AXIS 231D+/232D+ is connected to the network and that power has been applied.
2. Start AXIS IP Utility.
When the AXIS 231D+/232D+ appears in the window, double-click it to open the camera's home page.
3. See Setting the Password, on page 11 for further instructions.

Assign the IP address manually (optional)

1. Acquire an unused IP address on the same network segment as your computer.
2. Select the AXIS 231D+/232D+ in the list.
3. Click the button
4. Click the Assign button and follow the instructions.
5. Click the Home Page button to access the camera's web pages.
6. See page 11 for instructions on how to set the password.
Assign new IP address to the selected device and enter the IP address.
AXIS 231D+/232D+ Installation Guide