Newton CVR640 Manual De Instrucciones página 4

Connection to
Digisight/Hornet
Note: it is not recommended to attach the CVR640 on riflescopes because the video recorder
is not designed for heavy shock resistance.
Indication LEDs
Is on
Blue LED:
Blinking
Blinking fast
Blinks for a couple of seconds,
Red LED:
recorder turns off.
Installing the CVR640 on digital NV devices
 The CVR640 is fitted with a mount which enables the unit to be affixed to a
Weaver rail of your NV device.

If your NV device does not have a Weaver rail, the CVR640 can be attached
with the help of the supplied ¼" tripod socket adaptor. To do this, screw the
adaptor into the tripod socket of a digital NV device and attach the CVR640 to
the Weaver rail of the adaptor.
Software
The delivered memory card contains useful files as follows:

CVR640 Driver – Driver software for the CVR640 which serves to connect the
unit to your PC. Install this driver before connection.

CVR640 Video Converter – software to enable direct video recording to a PC
hard disc.
settime.txt – time and date setup file.
 instr_Video Recorder CVR640 - user manual
The CVR 640 is compatible with operating systems Windows XP, Windows Vista
and Windows 7.
Note: It is recommended that before use of the CVR640 you should save the
supplied software to your PC. In case of loss of the software files, you can e-mail
us at support@yukonopticsglobal.com
Pic. 2b
The video recorder is On
The video recorder is recording
Low batteries (voltage sank to 2.5-2.8V)
No memory card or memory card is full.
Connection to PC
The CVR640 should be powered off.
Insert SD memory card into the CVR640, connect the CVR640 with the
supplied USB cable to your PC – the CVR640 will be detected as a removable
disc.
With the help of Total Commander or another file manager you can handle the
SD card as a removable disc.
Note: Transmission speed from the memory card to the PC will not exceed
1Mb/sec.
Video recording to a PC hard disc
The CVR640 should be powered off and memory card removed.

Use a USB cable to connect the CVR640 to the PC.
A window as shown in pic. 3 comes up. Now you will be able to handle the files
recorded on the unit's memory card. Press the "EXIT" button when finished.
2
Pic. 3