Snooper MY-TRAK WPT250 Guia De Inicio Rapido página 5

Getting to know your My-Trak WPT250
1. USB charger socket
Charge your WPT250 using the AC charger provided.
It will take approximately 3 hours to fully charge.
2. Battery light indicator
Red when battery low and requires charging.
Orange when charging. Green when fully charged.
3. GPS indicator
Red flashing LED – No GPS connection
Green flashing LED – GPS connection successful
4. GSM indicator
Green flashing LED – GPRS connection successful.
Red flashing LED – No GPRS connection
5. Power button
Press and hold for 5 seconds to power on. 3 Green LEDs will flash for a few seconds
as WPT250 boots up. Press and hold for 5 seconds to power off.
Please note it may take a few minutes for WPT250 to connect to GPS and GPRS
after you have powered it on.
EN • 5
Snooper My-Trak wpt250 QSG_languages.indd 5 04/01/2011 12:55