KlipXtreme Keon Manual De Instrucciones página 5

6. The LED light will turn blue to indicate that the Bluetooth
successful.
7. If after 60 seconds the pairing process fails, please repeat steps 1 through 6
described above.
8. The headset will go automatically into standby mode after several minutes of
inactivity.
9. Turn off the headset when not in use to save battery power. "Power off" will be
heard to confirm your selection.
Pairing two devices
1. Follow the instructions above to pair the headphones with the first phone.
2. Then, turn off the Bluetooth function in the first phone.
®
3. Once you disconnect the first paired phone, your headphones will automatically
go back into pairing mode. The red and blue LED will blink alternatively after the
device has been disconnected.
4. On your second phone, search and select the newly discovered audio device
(KWH-500) being displayed in the Bluetooth
after connection has been successful.
5. Turn on the Bluetooth function on the first phone and pair it with your
®
headphones.
6. Your headphones are now connected with the two phones.
Note: You will be able to play music or answer calls from one phone at a time.
The two phones can't work simultaneously.
connection is
®
list; the LED light will turn blue
®
VI. Using the wireless headset
Answering and ending a call using your mobile phones
1. When there is an incoming call, an alert tone will be heard through your
headphones. Briefly press the Power/Multifunction switch to pick it up. You may
also press the answer button on your cellular phone to take the call.
2. To end a call, simply press the Power/Multifunction switch once again. Likewise,
you may also finish the call directly using the end key on your cell phone.
3. To reject or ignore an incoming call, press and hold the Power/Multifunction
switch for about 1-2 seconds.
4. If you want to redial the last number called, press the Power/Multifunction
switch twice.
Music playback
1. Briefly press the Power/Multifunction switch to play and stop audio.
2. Press and hold the and buttons to go to the Next or Previous track.
3. Press briefly the and buttons to increase or decrease the audio level on the
headphones.
4. When listening to music using your mobile phone, playback will pause to allow
the call to go through.
5. As soon as you hang up, music playback will resume automatically.