Hilti Measuring Systems Service; Transport And Storage - Hilti PLT 300 Manual De Instrucciones

2. Use only a soft, clean cloth to clean the tool.
6.2 Maintenance
▶ To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by Hilti for use with the product can be found at your
local Hilti Center or online at: www.hilti.com.
6.3

Hilti Measuring Systems Service

Hilti Measuring Systems Service checks the tool and, if deviations from the specified accuracy are found,
recalibrates it and checks it again to ensure conformity with specifications. The service certificate provides
written confirmation of conformity with specifications at the time of the test. The following is recommended:
• Choose a suitable test/inspection interval in accordance use of the tool.
• Have the product checked by Hilti Measuring Systems Service after exceptionally heavy use or subjection
to unusual conditions or stress, before important work or at least once a year.
Having the product checked by Hilti Measuring Systems Service does not relieve the user of his/her
obligation to check the product before and during use.
7

Transport and storage

7.1 Transport
ATTENTION
Risk of damage Leaking batteries may damage the product.
▶ The battery must be insulated or removed from the product described before it is shipped or sent by
mail.
▶ Use the Hilti shipping box or packaging of equivalent quality for transporting or shipping your equipment.
7.2 Storage
ATTENTION
Risk of damage Leaking batteries may damage the product.
▶ Remove the battery if the tool is to remain unused for a long period of time.
▶ Do not put the tool into storage when wet. Allow it to dry before putting it away.
▶ Always clean the tool, its transport container and accessories before putting them into storage.
▶ Check the accuracy of the equipment before it is used after a long period of storage or transportation.
▶ Observe the temperature limits when storing the equipment, especially in winter and summer (-40 °C to
+63 °C (-40 °F to +145 °F)).
8 Disposal
WARNING
Health hazards Never dispose of the equipment carelessly or improperly!
▶ The burning of plastic components generates toxic fumes which may present a health hazard. Batteries
may explode if damaged or exposed to very high temperatures, causing poisoning, burns, acid burns or
environmental pollution.
▶ Careless disposal may permit unauthorized and improper use of the equipment. This may result in
serious personal injury, injury to third parties and pollution of the environment.
▶ Dispose of defective batteries right away. Keep them out of reach of children. Do not disassemble or
incinerate the batteries.
▶ Batteries that have reached the end of their life must be disposed of in accordance with the official
regulations or returned to Hilti.
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
2100874
*2100874*
Printed: 31.01.2018 | Doc-Nr: PUB / 5245384 / 000 / 01
English 19