Publicidad
Idiomas disponibles
Idiomas disponibles
L455
Start Here
1
Unpack
Note:
The included ink bottles must be used for product setup and are not for resale.
Caution:
Do not open the ink bottles until you are ready to fill the ink tanks. The ink bottles are vacuum packed to maintain reliability.
2
Fill ink tanks
Note:
This product requires careful handling of ink. Wear plastic gloves and place a sheet
of paper under the ink tank unit when you fill or refill the ink tanks, as ink may splatter. If
ink spills, wipe it off immediately to avoid permanent stains. If ink gets on your clothes or
belongings, it may not come off.
Adjust the control panel, then
turn on the product.
3
Load paper
Warning:
Caution:
Replace bottle cap tightly, or
ink may leak.
Select your language, then press
the OK button.
Read these instructions before using your product.
Keep ink bottles out of the reach of children and do not drink the ink.
During initial setup, make sure to use
the ink bottles that came with your
product and use all of the ink.
Fill each tank with the correct ink color.
When you see a message, press the OK button for
3 seconds, then press the
ink. Ink charging takes approximately 20 minutes.
Select the paper settings on the product's control panel.
start button to start charging
Publicidad
