Operation Condition; Before Starting Up - Ideal Heat Elite Pro Manual De Funcionamiento

OPERATION CONDITION

Before starting up

• As required, push-fit appropriate adapters.
• If using an extension cord, it must be of at least 14 gauge.
• The voltage rating stated on the tool should correspond to the main power voltage.
• Power cord and plug must be in perfect condition.
Starting up
Connect tool to main power supply.
Step-switch position 0: Tool is switched off
Step-switch position
Step-switch position
Step 0
Cooling down the tool
1) Dial potentiometer on MIN setting
2) Switch on step II
I: Heating infinitely adjustment to 840°F. Air flow 380 l/min
II: Heating infinitely adjustment to 1020°F. Air flow 550 l/min
Step I Step II Potentiometer for
infinitely temperature
adjustment
USA
5