Alarm; Sound & Light Indication; Reset The Kpr2000; Erase All Codes - LiftMaster KPR2000 Manual Del Usuario

PROGRAMMING

Alarm

TO RESET THE ALARM
Programming Step
To reset the door forced
open warning
To reset the door open too
long (DOTL) warning
ANTI-TAMPER ALARM
The KPR2000 uses an optical sensor as the input for its internal alarm. If
the case is opened while the KPR2000 is powered, the alarm will operate.
Enter Master Code or a valid card to silence all alarm outputs.
Sound & Light Indication
Operation Status
Power On
Standby
Press Keypad
5 Second Time-out
Enter Master Code Entry Mode
In Program Mode
Entered Single Program Step Successfully
Entered Continuous Program Step Successfully
Entered Program Step Incorrectly
Exited from Program Mode
Entry Granted
Alarm Mode Engaged
Pressing ✱ Toggles Standby/Master Code Entry
Keystroke Combination
(Read valid card)
OR
(Master Code) #
(Read valid card)
OR
(Master Code) #
Red LED
Flashing
Flashing
Flashing
Flashing
ON
ON
ON
Flashing
Flashing
ON/Flashing
FOR TECHNICAL SUPPORT DIAL OUR TOLL FREE NUMBER:

Reset the KPR2000

This will reset the KPR2000 to the factory default but all card/PIN
information will still be retained. This will also require reprogramming of
the Master Add and Delete Cards. NOTE: This is useful if the original
Master Add and Delete Cards have been lost.
1. Power the KPR2000 down.
2. Press and hold the ✱ button while power is restored to the KPR2000.
3. Release the button and wait until the amber LED shines.
4. Present any 26 bit proximity card or the Manager Add Card (provided)
to the KPR2000. This card is now the Manager Add Card.
5. Present any 26 bit proximity card or the Manager Delete Card
(provided) to the KPR2000. This card is now the Manager Delete
Card.
When the red LED begins to blink, the KPR2000 has been successfully
reset.

Erase all Codes

This will delete ALL User data.
1. Enter Program Mode by pressing: ✱ (Master Code) #.
2. Press 2 0000 #.
All configuration data is retained.
Green LED
Single Flash
Single Flash
Single Flash
ON
1-800-528-2806
8
Amber LED
Short Single Beep
Short Single Beep
3 Short Beeps
Short Single Beep
Short Single Beep
Short Single Beep
ON Short Single Beep
ON 3 Short Beeps
Short Single Beep
Short Single Beep
Short Single Beep
Sounds
Alarm