Mu Sic Pl A Yb A Ck; Switching Off - NAIM HDX Guia De Inicio Rapido

HDX Hard Disk Player Quick Start Guide
2 Ripping Music
Note: The HDX is able to play CDs directly as well as ripping them. CD playback is initiated from
the System Setup menu.
open
• Press the front panel button and insert a CD in the drawer. Press the
again to close the drawer.
• The HDX will begin ripping automatically. To view progress, use the front panel touch screen
to select Ripping Monitor from the
ripping is complete. A typical CD can take up to eight minutes to rip.
Note: Ripping a CD you don't personally own constitutes a violation of copyright law. You must
ensure if inserting a borrowed CD for playback that the HDX is not set automatically to rip the
CD.
Note:
The HDX has some music pre-ripped when manufactured.
Note: Although the HDX contains a limited internal music database, to be able to identify a
CD and download its associated data during the ripping process, it must be connected to a
working internet connection.

3 Mu sic Pl a yb a ck

• Use the front panel touch screen to select
either Albums, Artists or Tracks. From the following menu choose an item and select
• Selecting the Quick Play menu from the
popular, recently played and newest items.
4 Swit chi ng Off
• Switching off the HDX from its rear panel power switch is not normally necessary.
• The HDX can be put into standby by pressing the handset
standby
holding the front panel
HDX shuts down and stop flashing but remain lit when it is in standby.
• Do not switch off the HDX from the rear panel power switch or unplug it from the mains until
it is in standby mode.
Full installation and operational information can be found in the Reference Manual
included on the CD packed with the product, or at www.naimaudio.com
Home menu. The CD will be ejected automatically when
Browse Music
from the
Home menu provides quick access to the most
standby
button for 1 second. The standby button will flash as the
open
button
Home
menu and then
Play.
key or pressing and