Close Computer - Sonnet CRESCENDO PCI G3 Manual De Instalación

En
2. If your Crescendo card has a bracket, you will
need to adjust the size of the card by removing
the metal bracket on the top of the card
(Figure 7). Unscrew the two bracket screws and
remove the bracket from the Crescendo card.
Package the two screws and the bracket in the
Crescendo's anti-static package and store
it in a safe place.
3. Align the Crescendo card directly over the
Processor Card Slot (Figure 8). For the
PowerTower, refer to Figure 4-Label A; for the
PowerTower Pro, refer to Figure 5-Label A.
Gently press down until the card is firmly
seated in the Processor Card Slot, taking care
not to move or wiggle the board as you install
it into the slot.
4. If you removed the support bracket/fan
assembly, replace it now.

Close Computer

1. Replace the case cover and security screw onto
your computer (Figure 9).
2. Return the computer to your computing area
and reconnect the power and peripheral cables
to the computer.
3. Affix the Powered by Sonnet label to the front of
your computer.
bracket
screw
Figure 7; Figura 7
Processor Card Slot
Figure 8; Figura 8
security screw
Figure 9; Figura 9
screw
Crescendo card
security screw
case cover
6-7