Close Computer; Turn On Computer - Sonnet CRESCENDO PCI G3 Manual De Instalación

En
3. Align the Crescendo card directly over the
Processor Card Slot on the logic board
(Figure 7). Gently press down until the card is
firmly seated in the Processor Card Slot, taking
care not to move or wiggle the board as you
install it into the slot.

Close Computer

1. Replace the case cover and security screw onto
your computer (Figure 8).
2. Return the computer to your computing area
and reconnect the power and peripheral cables
to the computer.
3. Affix the Powered by Sonnet label to the front of
your computer.

Turn On Computer

1. Turn on your PowerCurve. Your accelerated
machine should boot normally.
2. Due to resetting the CUDA switch, some
Mac OS preference files have been reset to their
default settings. You will need to reset the
Date & Time control panel as well as your
preference settings for the Mouse and Keyboard
control panels.
Crescendo card
Processor Card Slot
Figure 7; Figura 7
security screw
Figure 8; Figura 8
5-7