Conformité Aux Normes; Attaches - fortress I Serie Instrucciones De Instalación

Fig. 3
Single Board Lengths
gle Board Lengths
Single Board Lengths
Mur
FIXED
fixe
WALL
XED
FIXED
ALL
WALL
Multiple board lengths placed consecutively
Fig. 4
Expamsion gap provided for the change in length of both boards.
Multiple board lengths placed consecutively
Expamsion gap provided for the change in length of both boards.
Multiple board lengths placed consecutively
Expamsion gap provided for the change in length of both boards.
Code compliance:
When installing against vertical structures, allow for both the code required spacing and the required expansion
gap to ensure board remain code compliant after board expansion.
Code compliance:
Conformité aux normes
When installing against vertical structures, allow for both the code required spacing and the required expansion
gap to ensure board remain code compliant after board expansion.
Lors de l'installation sur des structures verticales, allouer à la
fois l'espace nécessaire pour la conformité aux normes et celui
Code Compliant gap
pour l'expansion afin de vous assurer que les planches de-
meurent conformes aux normes après leur expansion.
Tel que montré dans la Fig. 5.
Code compliance:
Fig. 5
When installing against vertical structures, allow for both the code required spacing and the required expan
gap to ensure board remain code compliant after board expansion.
Mur
FIXED
WALL
fixe
Espace conforme
Code Compliant gap
INSTALLATION : ATTACHES
Conseils d'installation :
Clous
Une seule longueur de planches (VUE DE HAUT)
Solive
Joist
Joist
Joist
Espace d'expansion
Expansion Gap
Plusieurs longueurs de planches consécutives (VUE DE HAUT)
Expansion Gap
Espace d'expansion alloué pour les différences de longueur entre les planches
Expansion Gap
Doubles solives sur les joints d'about
Expansion Gap
Espace d'expansion
Expansion Gap
Maximum allowable expansion point
FIXED
WALL
Maximum allowable expansion point
FIXED
WALL
Code Compliant gap
Expansion Gap
Point d'expansion maximal permis
Maximum allowable expansion point
aux normes

Attaches

DECKING INSTALLATION : I-SERIES
Fixation
Blocking
Blocking
Blocking
Planches transversales
Breaker Boards
Double joist on butt joins
Breaker Boards
Breaker Boards
Double joist on butt joins
Double joist on butt joins
Original length
Original length
VUE DE
HAUT
Longueur
Original length
originale
Perceuse
Espace d'expansion
Expansion Gap
Expansion Gap
Expansion Gap
Expansion Gap
Espace d'expansion
Expansion Gap
FIXED
WALL
FIXED
Code Compliant gap
WALL
Code Compliant gap
Expansion Gap
Espace conforme
Code Compliant gap
aux normes
Mur
FIXED
fixe
WALL
FIXED
WALL
Mur
FIXED
WALL
fixe
33